China Wire EDM Parts, Metal Stamping Die Parts, Precision Tooling Fixtures Manufacturer

Wire EDM Parts

Wire EDM Parts (WEDM-LS) is a branch of wire electrical discharge machining technology. It uses continuously moving fine metal wires as electrodes and ablates metals through pulsed spark discharge to achieve precision processing. It is mainly applied in the manufacturing of workpieces with complex shapes and high precision requirements. Its electrode wire runs at a unidirectional low speed of less than 0.2mm/s, with a processing accuracy of 0.001mm and a surface roughness of Ra0.12μm, approaching the grinding level. The core processes include multiple cutting techniques, anti-electrolysis pulse power supply and dynamic corner treatment. Combined with fine wire cutting (0.03-0.2mm electrode wire) and constant tension control, it can reduce the softening layer of the workpiece and enhance processing stability. The processing uses pure water for cooling and no wastewater is discharged. As the slow wire electrical discharge machine adopts a continuous wire supply method with wire electrodes, that is, the wire electrodes complete the processing during their movement, even if the wire electrodes are worn out, they can be continuously replenished, thus improving the processing accuracy of the parts. The surface roughness of the workpieces processed by slow wire electrical discharge machining (EDM) machines can usually reach Ra=0.12μm or more. Moreover, the roundness error, straightness error and dimensional error of slow wire EDM machines are much better than those of fast wire EDM machines. Therefore, slow wire EDM machines have been widely used in the processing of high-precision parts.

Xincheng has its own factory and is a professional manufacturer and supplier of Wire EDM Parts in China. Welcome to consult and purchase.

Metal Stamping Die Parts

Xincheng's Metal Stamping Die Parts are metal parts installed on stamping dies, also known as punches or punches, which achieve cutting or deformation by direct contact with materials. According to their shapes, they can be classified into A-type, T-type and special-shaped punches. The materials are mainly high-speed steel (such as CR12, SKD series) and tungsten steel, among which high-speed steel is the most widely used, and tungsten steel is mostly used in high-precision punching and shearing dies. The manufacturing precision of domestic punches can reach ±0.002mm. Surface titanium plating treatment (such as TIN, TICN) can reduce the coefficient of friction and extend the service life. Hard alloy punches are formed by sintering tungsten carbide with binders such as cobalt and nickel. The hardness of the alloy can be adjusted according to the thickness of the stamped part. They are suitable for blanking of hardware, electronic parts and non-metallic materials. Punches are also called punch, upper die, male die, punch needle, etc. Punches are further classified into A-type punches, T-type punches and special-shaped punches. The punch is a metal part installed on the stamping die, which is used for direct contact with the material to cause deformation and cut the material.

Xincheng has its own factory and is a professional manufacturer and supplier of Metal Stamping Die Parts in China. Welcome to consult and purchase.

Precision Tooling Fixtures

Xincheng's Precision Tooling Fixtures is the core process equipment for achieving precise positioning and stable clamping of workpieces in the intelligent manufacturing system. It is specially designed for high-end manufacturing fields such as aerospace, automotive parts, precision electronics, and medical devices. It can control the positioning accuracy of the workpiece within the range of ±0.001mm to ±0.01mm, and in combination with the automated production line, achieve efficient clamping and processing coordination. Through the combined advantages of "customized structural design + high-rigidity material selection + precise processing technology", it has solved the pain points such as positioning deviation and clamping deformation in the processing of complex workpieces. It is a key support for ensuring the consistency of product processing accuracy and improving production efficiency, and is hailed as the "precise positioning hand" of the manufacturing industry.

Xincheng has its own factory and is a professional manufacturer and supplier of Wire EDM Parts, Metal Stamping Die Parts, Precision Tooling Fixtures in China. Welcome to consult and purchase.

ABout US

Shenzhen Xincheng Precision Technology Co., Ltd. focuses on the research and development and production of high-precision components, metal stamping die parts, and precision components for automated equipment. Its products are widely used in academic research, medical devices, the semiconductor industry, new energy equipment, and core components for industrial automation equipment. Through continuous optimization of precision machining processes, the company has overcome technical challenges in producing micro-parts and complex structural components, possessing advantages in micro-metal parts and gear components. The company owns various machining equipment, including Sodick oil cutting machines, Western wire EDM machines (capable of machining 0.03mm fine wire), and FANUC CNC machines, and has assembled a team of highly skilled and experienced professionals.